Parts & Consumables
In North America, please email all order inquiries to parts@qdusa.com.
In UK and Ireland, please email all order inquiries to info@qd-uki.co.uk.
All other territories please order directly from your local office.
Quantity Included: 50 pairs
SnCps into brass half-tube sample holder QDS-4500-608.
Quantity Included: 5
Made to snap into the standard brass sample holder. Useful for orienting planar samples perpendicular to the applied field.
Quantity Included: Each
Quantity Included: Each
4mm wide.
Quantity Included: Each
VSM Sample rod flexure adapter for MPMS 3.
Quantity Included: Each
3.2 mm inner diameter.
Quantity Included: Each
Mounted in a quartz tube.
Quantity Included: Each
GGG crystal mounted on an MPMS3 quartz paddle QDC-4500-604.
Quantity Included: Each
Used exclusively on MPMS 3 systems.
Quantity Included: Each
Quantity Included: Set of 10
17mm x 30mm foils
Quantity Included: Each
5mm wide
Quantity Included: Each
Quantity Included: Each
Quantity Included: Each
Quantity Included: Set of 500
Quantity Included: Each
Used exclusively on MPMS 3 systems.
Quantity Included: Set of 100
Fits well in sample straws (AGC2) and brass large bore sample holder. ~15 mm long and ~5 mm diameter.
Quantity Included: Set of 100
Fits well in brass large bore sample holder. ~11 mm long and ~4.6 mm diameter.
Quantity Included: Each
Used to replace scroll tip seals for IDP-7 vacuum pump.
Quantity: Each
Quantity: Each
Quantity: Each
100 Ohm resistors wired to Ch. 1 and Ch. 2
Quantity: Each
Out-of-Plane/Hall Effect
Quantity: Each
3.2mm Inner Diameter
Quantity: Each
Quantity Included: Set of 3 Binders
Quantity Included: Each
Used to arbitrarily permute leads to user’s experiment while it is in the system; also provides access for external electronics.
Quantity Included: Each
Usable on PPMS and MPMS but not on MPMS 3.
Quantity Included: Each
Includes one (1) Extraction Tool and one (1) Puck Adjustment Tool.
Quantity Included: Each
Quantity Included: Each
Quantity Included: Each
Quantity Included: Each
Quantity Included: Each
Sealed bucket for liquid or air-sensitive samples.
Quantity Included: Each
Includes Torque chip support and small screwdriver.
Quantity Included: Each
Does not include any measurement stage / puck; Requires Sample Mounts or Heat Capacity pucks for measurements.
Quantity Included: Each
Does not include Thermometer Shoe Assembly or Heater Shoe Assembly
Quantity Included: Each
Quantity Included: Each
Voltage lead separated from the thermometer shoe
Quantity Included: Each
Quantity Included: Set of 30
Quantity Included: Set of 10
Quantity Included: Set of 3 shoes
Includes two (2) Thermometer Shoe Assemblies and one (1) Heater Shoe Assembly.
Quantity Included: Each
Can be used with ACMS-II, MPMS-3 and the Large Bore VSM coils.
Quantity Included: Each
Uncalibrated puck.
Quantity Included: Each
Uncalibrated puck.
Quantity Included: Each
Uncalibrated puck. This puck is for use in PPMS DR systems (for DynaCool DR please order part QDC-4085-280).
Quantity Included: Each
Uncalibrated puck. This puck is for use in DynaCool DR systems (for PPMS DR please order part QDC-4085-264).
Quantity Included: Each
DR mounts are Au-plated silver; one edge is sanded to show this.
Quantity Included: Each
Quantity Included: Each
Uncalibrated puck.
Quantity Included: Each
Inner diameter of blue tubes = 7.6mm
Quantity Included: Each
Diameter of blue bearings = 7.6mm
Quantity Included: Each
VSM Sample rod flexure adapter for PPMS and VersaLab.
Quantity Included: 50 pairs
Snaps into brass half-tube sample holder QDC-4500-608.
Quantity Included: Each
3.2 mm inner diameter
Quantity Included: Each
4mm wide
Quantity Included: 5
Made to snap into the standard brass sample holder. Useful for orienting planar samples perpendicular to the applied field.
Quantity Included: Each
Diameter of blue bearings = 10.3mm
Quantity Included: Each
Inner diameter of blue tubes = 10.3mm
Quantity Included: Each
4.8 mm inner diameter
Quantity Included: Each
Sample holder optimised for securing thin film samples
Quantity Included: Each
For use with samples that are affected by the moisture and heat involved in mounting with Zircar cement. Includes dry mount plates, staples and copper foil coupons.
Quantity Included: Each
Quantity Included: Set of 10
12mm x 30mm foils
Quantity Included: Each
3.5mm wide
Quantity Included: Set of 500
Quantity Included: Each
Quantity Included: Each
Quantity Included: Set of 3
Quantity Included: Set of 2
For in-plane sample rotation
Quantity Included: Each
Max torque ~1e-4 N-m
Quantity Included: Each
Fully calibrated at Quantum Design.
Quantity Included: Each
Max torque ~1e-5 N-m
Quantity Included: Each
Fully calibrated at Quantum Design.
Quantity Included: Set of 3
Quantity Included: Set of 3
Quantity Included: Each
Quantity Included: Each
Quantity Included: Set of 3
Felt strip pads for centering rings of VSM coilset.
Quantity Included: Set of 100
Fits well in sample straws (AGC2) and brass large bore sample holder. ~15 mm long and ~5 mm diameter.
Quantity Included: Set of 100
Fits well in brass large bore sample holder. ~11 mm long and ~4.6 mm diameter.
Quantity Included: Each
Same size as Pd standard cylinder
Quantity: Each
Quantity: Each
Quantity: Each
For use with the Type-M Multifunction Probe
Quantity: Each
Quantity: Each
Allows connection of the Breakout Box-BNC to the PPMS/DynaCool/VersaLab Gray LEMO connection.
Quantity: Each
Used to replace tip seals on Edwards NXDS 10IR
Quantity: Each
For use with the Type-M Multifunction Probe
Quantity: Each
Used exclusively for the PPMS
Quantity: Each
Allows connection of the Breakout Box-BNC to the Type-M and Type-G Multifunction Probes
Quantity: Each
Quantity: Each
Quantity: Each
Provides access to external electronics via BNC connectors. Each channel can be selectively grounded or tied to a common bus.
Quantity: Each
Quantity: Each
Quantity: Each
Set of 2
Set of 2
Quantity: Each
Enables users to easily bench test samples mounted to either the 48 pin LCC adapter or 20 pin LCC socket adapter
Quantity: Each
Used to replace tip seals on Agilent IDP-7 and IDP-10
Quantity: Each
Quantity: Each
Quantity: Each
Quantity: Each
Includes Platform with Heater and Thermometer – Uncalibrated.
Quantity: Each
For use with the Type-M Multifunction Probe
Quantity: Each
Quantity: Each
Can be used with ACMS II, MPMS 3 and large bore VSM coil sets.
Quantity: Each
Enables users to easily bench test samples mounted to standard pucks
Quantity: Each
Allows connection of the Breakout Box-BNC to the PPMS/DynaCool/VersaLab Gray LEMO connection.
Quantity: Each
Uncalibrated
Quantity: Each
Quantity: Each
Quantity: Each
For use with the Type-M Multifunction Probe
Fits well in brass large bore sample holder (QDS-4096-630). ~11 mm long and ~4.6 mm diameter.
Quantity: Each
Allows connection of the Breakout Box-BNC to the Type-M and Type-G Multifunction Probes
Quantity: Each
DR mounts are Au-plated silver; one edge is sanded to show this.
Set of 10
Each foil coupon is 12 mm x 30 mm
Quantity: Each
Quantity: Each
Set of 500
Quantity: Each
Provides access to external electronics via BNC connectors. Each channel can be selectively grounded or tied to a common bus.
Quantity: Each
Quantity: Each
Set of 3
Set of 3
Quantity: Each
Quantity: Each
Use in DynaCool Platform Only – Uncalibrated.
Quantity: Each
Quantity: Each
Quantity: Each
Max torque is ~1e-5 N-m
Quantity: Each
3.2 mm inner diameter
Quantity: Each
Diameter of blue bearings is 7.6 mm
Quantity: Each
Quantity: Each
Diameter of blue bearings is 10.3 mm
Set of 2
For in-plane sample rotation
Quantity: Each
Does not include thermometer or heater shoes
Quantity: Each
Includes two torque board adaptors and a small screwdriver
Quantity: Each
Set of 10
Quantity: Each
Set of 30
Quantity: Each
Includes two thermometer shoes and one heater shoe
Set of 2
50 Pairs
Fits well in standard sample holder (QDC-8000-001) and brass large bore sample holder (QDC-4096-630). ~15 mm long and ~5 mm diameter.
Set of 2
Quantity: Each
Enables users to easily bench test samples mounted to either the 48 pin LCC adapter or 20 pin LCC socket adapter
Quantity: Each
Used to replace tip seals on Agilent IDP-7 and IDP-10
Set of 3
Quantity: 50 pairs
Snaps into brass half-tube sample holder (QDC-4096-391)
Quantity: Each
Quantity: Each
Quantity: Set of 5
Snaps into standard brass sample holder. Useful for orienting planar samples perpendicular to the applied field.
Quantity: Each
Used to permute leads to user
Quantity: Each
4.8 mm Inner Diameter
Quantity: Each
For use with samples that are affected by the moisture and heat involved in mounting with Zircar cement. Includes dry mount plates, staples, and copper foil coupons.
Quantity: Each
Voltage lead is separated from the thermometer shoe (Application Note 1684-201)
Quantity: Each
Max torque is ~1e-4 N-m
Quantity: Each
4 mm wide
Quantity: Each
Does not include any measurement stage/puck. Requires DC Resistivity/ECO sample mount (QDC-4092-610) for electrical measurements; or heat capacity frame (QDC-4085-216) for thermal measurements.
Quantity: Each
Quantity Included: Each
Diameter of blue bearings = 7.6mm
Quantity Included: Each
diameter of blue bearings = 10.3mm
Quantity Included: Each
Inner diameter of blue tubes = 7.6mm
Quantity Included: Each
VSM Sample rod flexure adapter for PPMS and VersaLab
Quantity Included: Each
Sample holder optimised for securing thin film samples.
Quantity Included: Each
Inner diameter of blue tubes = 10.3mm
Quantity Included: Each
For use with samples that are affected by the moisture and heat involved in mounting with Zircar cement. Includes dry mount plates, staples and copper foil coupons.
Quantity Included: Each
Quantity Included: Each
Quantity Included: Set of 500
Quantity Included: Set of 3
Felt strip pads for centering rings of VSM coilset.
Quantity Included: Set of 100
Fits well in sample straws (AGC2) and brass large bore sample holder. ~15 mm long and ~5 mm diameter.
Quantity Included: Set of 100
Fits well in brass large bore sample holder. ~11 mm long and ~4.6 mm diameter.
Quantity: Each
Quantity: Each
Quantity: Each
Includes Platform with Heater and Thermometer – Uncalibrated.
Quantity: Each
For use with the Type-M Multifunction Probe
Quantity: Each
Quantity: Each
Can be used with ACMS II, MPMS 3 and large bore VSM coil sets.
Quantity: Each
Enables users to easily bench test samples mounted to standard pucks
Quantity: Each
Allows connection of the Breakout Box-BNC to the PPMS/DynaCool/VersaLab Gray LEMO connection.
Quantity: Each
Uncalibrated
Quantity: Each
For use with the Type-M Multifunction Probe
Quantity: Each
Allows connection of the Breakout Box-BNC to the Type-M and Type-G Multifunction Probes
Set of 10
Each foil coupon is 12 mm x 30 mm
Quantity: Each
Quantity: Each
Quantity: Each
Provides access to external electronics via BNC connectors. Each channel can be selectively grounded or tied to a common bus.
Quantity: Each
Set of 3
Set of 3
Quantity: Each
Quantity: Each
Quantity: Each
Quantity: Each
Max torque is ~1e-5 N-m
Quantity: Each
3.2 mm inner diameter
Quantity: Each
Set of 2
For in-plane sample rotation
Quantity: Each
Does not include thermometer or heater shoes
Quantity: Each
Includes two torque board adaptors and a small screwdriver
Quantity: Each
Set of 10
Quantity: Each
Set of 30
Quantity: Each
Includes two thermometer shoes and one heater shoe
Set of 2
Set of 2
Quantity: Each
Enables users to easily bench test samples mounted to either the 48 pin LCC adapter or 20 pin LCC socket adapter
Quantity: 50 pairs
Snaps into brass half-tube sample holder (QDC-4096-391)
Quantity: Each
Quantity: Each
Quantity: Set of 5
Snaps into standard brass sample holder. Useful for orienting planar samples perpendicular to the applied field.
Quantity: Each
Used to permute leads to user
Quantity: Each
4.8 mm Inner Diameter
Quantity: Each
Voltage lead is separated from the thermometer shoe (Application Note 1684-201)
Quantity: Each
Max torque is ~1e-4 N-m
Quantity: Each
4 mm wide
Quantity: Each
Does not include any measurement stage/puck. Requires DC Resistivity/ECO sample mount (4092-610) for electrical measurements; or heat capacity frame (4085-216) for thermal measurements.
