Parts & Consumables

In North America, please email all order inquiries to parts@qdusa.com.

In UK and Ireland, please email all order inquiries to info@qd-uki.co.uk.

All other territories please order directly from your local office.

VSM Powder Sample Holders
QDC-4096-388

Quantity Included: 50 pairs

SnCps into brass half-tube sample holder QDS-4500-608.

Quartz Rod Sample Brace
QDC-4096-399

Quantity Included: 5

Made to snap into the standard brass sample holder. Useful for orienting planar samples perpendicular to the applied field.

MPMS 3 Sample Rod
QDC-4500-600

Quantity Included: Each

MPMS 3 Quartz Paddle Sample Holder
QDC-4500-604

Quantity Included: Each

4mm wide.

MPMS 3 VSM Sample rod flexure
QDC-4500-607

Quantity Included: Each

VSM Sample rod flexure adapter for MPMS 3.

MPMS 3 Palladium Reference Sample (Mounted)
QDC-4500-645

Quantity Included: Each

Mounted in a quartz tube.

MPMS 3 GGG AC Reference Sample (Mounted)
QDC-4500-648

Quantity Included: Each

GGG crystal mounted on an MPMS3 quartz paddle QDC-4500-604.

MPMS 3 Helium Transfer Line
QDC-4504-008

Quantity Included: Each

Used exclusively on MPMS 3 systems.

MPMS 3 Oven Sample Rod
QDC-4505-110

Quantity Included: Each

MPMS 3 Oven Copper Foil Coupons
QDC-4505-141

Quantity Included: Set of 10

17mm x 30mm foils

MPMS 3 Oven Heater Stick
QDC-4505-263

Quantity Included: Each

5mm wide

MPMS 3 ETO Sample Rod
QDC-4505-700

Quantity Included: Each

MPMS 3 ETO Sample Stage In Plane
QDC-4505-710

Quantity Included: Each

Box of Standard Sample Holders
QDC-8000-001

Quantity Included: Set of 500

Sealed Liquid Sample Holder
QDC-8505-013

Quantity Included: Each

Used exclusively on MPMS 3 systems.

Gelatin Capsules
QDC-AGC1

Quantity Included: Set of 100

Fits well in sample straws (AGC2) and brass large bore sample holder. ~15 mm long and ~5 mm diameter.

Polycarbonate Capsules
QDC-AGC3

Quantity Included: Set of 100

Fits well in brass large bore sample holder. ~11 mm long and ~4.6 mm diameter.

IDP-7 Scroll Pump Tip Seal Kit
QDC-HPIDP-7-TS

Quantity Included: Each

Used to replace scroll tip seals for IDP-7 vacuum pump.

Compressor Charge Kit
QDC-4201-400

Quantity: Each

Apiezon N Grease
QDC-4084-410-01

Quantity: Each

MPMS 3 ETO Reference Resistor (100 Ohm - Mounted)
QDC-4505-728

Quantity: Each

100 Ohm resistors wired to Ch. 1 and Ch. 2

MPMS 3 ETO Perpendicular Sample Holder
QDC-4505-711

Quantity: Each

Out-of-Plane/Hall Effect

MPMS 3 Brass Trough Sample Holder
QDC-4500-608

Quantity: Each

3.2mm Inner Diameter

Apiezon H Grease
QDC-4084-410-02

Quantity: Each

PPMS User's Manuals
QDC-1070-100

Quantity Included: Set of 3 Binders

Grey Lemo Breakout Box
QDC-3084-100

Quantity Included: Each

Used to arbitrarily permute leads to user’s experiment while it is in the system; also provides access for external electronics.

Flexible Helium Transfer Tube
QDC-4047-008

Quantity Included: Each

Usable on PPMS and MPMS but not on MPMS 3.

Sample Puck Tool Kit
QDC-4084-002

Quantity Included: Each

Includes one (1) Extraction Tool and one (1) Puck Adjustment Tool.

Puck Extraction Tool
QDC-4084-110

Quantity Included: Each

ACMS Sample rod
QDC-4084-230

Quantity Included: Each

ACMS Sample rod short extension and holder
QDC-4084-240

Quantity Included: Each

ACMS Sealed sample - cup
QDC-4084-241

Quantity Included: Each

ACMS Sealed Sample holder assembly
QDC-4084-245

Quantity Included: Each

Sealed bucket for liquid or air-sensitive samples.

Torque Magnetometer Platform Kit
QDC-4084-363

Quantity Included: Each

Includes Torque chip support and small screwdriver.

Vertical Puck Kit
QDC-4084-440

Quantity Included: Each

Does not include any measurement stage / puck; Requires Sample Mounts or Heat Capacity pucks for measurements.

Thermal Transport Sample Puck
QDC-4084-570

Quantity Included: Each

Does not include Thermometer Shoe Assembly or Heater Shoe Assembly

Thermal Transport Thermometer Shoe Assembly
QDC-4084-580

Quantity Included: Each

Thermal Transport Nernst Effect Measurement Shoe
QDC-4084-581

Quantity Included: Each

Voltage lead separated from the thermometer shoe

Thermal Transport Heater Shoe Assembly
QDC-4084-585

Quantity Included: Each

Thermal Transport Disc Sample Leads
QDC-4084-609

Quantity Included: Set of 30

Thermal Transport Bar Sample Leads
QDC-4084-610

Quantity Included: Set of 10

Thermal Transport Shoes Set
QDC-4084-616

Quantity Included: Set of 3 shoes

Includes two (2) Thermometer Shoe Assemblies and one (1) Heater Shoe Assembly.

ACMS II straw adapter assembly
QDC-4084-814

Quantity Included: Each

Can be used with ACMS-II, MPMS-3 and the Large Bore VSM coils.

Heat Capacity Puck
QDC-4085-210

Quantity Included: Each

Uncalibrated puck.

Heat Capacity Frame and Guard
QDC-4085-216

Quantity Included: Each

Uncalibrated puck.

DR 2D Heat Capacity Puck
QDC-4085-264

Quantity Included: Each

Uncalibrated puck. This puck is for use in PPMS DR systems (for DynaCool DR please order part QDC-4085-280).

DR 3D Heat Capacity Puck
QDC-4085-280

Quantity Included: Each

Uncalibrated puck. This puck is for use in DynaCool DR systems (for PPMS DR please order part QDC-4085-264).

Dilution Refrigerator User Sample Mount
QDC-4091-610

Quantity Included: Each

DR mounts are Au-plated silver; one edge is sanded to show this.

Helium-3 Resitivity/ETO/ACT Sample Mount
QDC-4092-610

Quantity Included: Each

Helium-3 Heat Capacity Puck
QDC-4092-621

Quantity Included: Each

Uncalibrated puck.

VSM Guide Tube
QDC-4096-301

Quantity Included: Each

Inner diameter of blue tubes = 7.6mm

VSM Sample Rod Assembly
QDC-4096-352

Quantity Included: Each

Diameter of blue bearings = 7.6mm

VSM Powder Sample Holders
QDC-4096-388

Quantity Included: 50 pairs

Snaps into brass half-tube sample holder QDC-4500-608.

VSM Brass Half-Tube Sample Holder
QDC-4096-391

Quantity Included: Each

3.2 mm inner diameter

VSM Quartz paddle Sample Holder
QDC-4096-392

Quantity Included: Each

4mm wide

Quartz Rod Sample Brace
QDC-4096-399

Quantity Included: 5

Made to snap into the standard brass sample holder. Useful for orienting planar samples perpendicular to the applied field.

VSM Large Bore Sample Rod
QDC-4096-610

Quantity Included: Each

Diameter of blue bearings = 10.3mm

VSM Large Bore Guide Tube
QDC-4096-620

Quantity Included: Each

Inner diameter of blue tubes = 10.3mm

VSM Large Bore Brass Half-Tube Sample Holder
QDC-4096-630

Quantity Included: Each

4.8 mm inner diameter

VSM Large Bore Aluminum Paddle Sample Holder
QDC-4096-635

Quantity Included: Each

Sample holder optimised for securing thin film samples

VSM Oven Dry Mount Kit
QDC-4097-002

Quantity Included: Each

For use with samples that are affected by the moisture and heat involved in mounting with Zircar cement. Includes dry mount plates, staples and copper foil coupons.

VSM Oven Sample Rod Assembly
QDC-4097-010

Quantity Included: Each

VSM Oven Copper Foil Coupons
QDC-4097-039

Quantity Included: Set of 10

12mm x 30mm foils

VSM Oven Heater Stick
QDC-4097-050

Quantity Included: Each

3.5mm wide

Box of Standard Sample Holders
QDC-8000-001

Quantity Included: Set of 500

Universal Sample Puck
QDC-8084-100

Quantity Included: Each

DC Resistivity/ETO Sample Puck
QDC-8084-109

Quantity Included: Each

Rotator Universal Sample Board
QDC-8084-341

Quantity Included: Set of 3

Rotator Field Parallel Sample Board
QDC-8084-342

Quantity Included: Set of 2

For in-plane sample rotation

Large Moment (3-leg) Torque Magnetometer Chip
QDC-8084-368

Quantity Included: Each

Max torque ~1e-4 N-m

Large Moment (3-leg) Torque Chip, Calibrated
QDC-8084-368-01

Quantity Included: Each

Fully calibrated at Quantum Design.

Standard Torque Magnetometer Chip
QDC-8084-369

Quantity Included: Each

Max torque ~1e-5 N-m

Standard Torque Chip, Calibrated
QDC-8084-369-01

Quantity Included: Each

Fully calibrated at Quantum Design.

Rotator ACT Sample Board
QDC-8084-370

Quantity Included: Set of 3

Rotator Resistivity/ETO Sample Board
QDC-8084-371

Quantity Included: Set of 3

Sample Wiring Test Station
QDC-8084-400

Quantity Included: Each

ACT Sample Puck
QDC-8084-509

Quantity Included: Each

Felt Pad for VSM Coilset and Baffle
QDC-8096-272

Quantity Included: Set of 3

Felt strip pads for centering rings of VSM coilset.

Gelatin Capsules
QDC-AGC1

Quantity Included: Set of 100

Fits well in sample straws (AGC2) and brass large bore sample holder. ~15 mm long and ~5 mm diameter.

Polycarbonate Capsules
QDC-AGC3

Quantity Included: Set of 100

Fits well in brass large bore sample holder. ~11 mm long and ~4.6 mm diameter.

GGG AC standard reference sample (cylinder)
QDC-YC3091

Quantity Included: Each

Same size as Pd standard cylinder

Compressor Charge Kit
QDC-4201-400

Quantity: Each

ACMS II AC Moment Reference Sample (GGG – Mounted)
QDC-4084-830

Quantity: Each

20 Pin LLC Socket Adapter
QDC-4087-459

Quantity: Each

For use with the Type-M Multifunction Probe

Apiezon N Grease
QDC-4084-410-01

Quantity: Each

MFP Fischer-to-LEMO Cable Fischer-to-LEMO Cable
QDC-3084-384

Quantity: Each

Allows connection of the Breakout Box-BNC to the PPMS/DynaCool/VersaLab Gray LEMO connection.

Scroll Pump Tip Seal Kit (Edwards)
QDC-HP13TS

Quantity: Each

Used to replace tip seals on Edwards NXDS 10IR

48 Pin Leadless Chip Carrier Adapter
QDC-4087-446

Quantity: Each

For use with the Type-M Multifunction Probe

PPMS Helium Transfer Line
QDC-4047-009

Quantity: Each

Used exclusively for the PPMS

MFP Fischer-to-Fischer Cable
QDC-3084-383

Quantity: Each

Allows connection of the Breakout Box-BNC to the Type-M and Type-G Multifunction Probes

Rotator Sample Board Puck Adapter
QDC-4084-375

Quantity: Each

VSM Oven Zircar Cement
QDC-4097-030

Quantity: Each

Breakout Box - BNC
QDC-4087-457

Quantity: Each

Provides access to external electronics via BNC connectors. Each channel can be selectively grounded or tied to a common bus.

Apiezon H Grease
QDC-4084-410-02

Quantity: Each

ACMS II DC Moment Reference Sample (Pd – Mounted)
QDC-4096-390-01

Quantity: Each

VSM DC Moment Reference Sample (Pd – Mounted)
QDC-4096-390

Quantity: Each

TTO Calibration Shunt (Copper)
QDC-4084-608

Set of 2

TTO Reference Sample (Nickel)
QDC-4084-611

Set of 2

Test Station - Chip Carrier
QDC-4087-455

Quantity: Each

Enables users to easily bench test samples mounted to either the 48 pin LCC adapter or 20 pin LCC socket adapter

Scroll Pump Tip Seal Kit (Agilent)
QDC-HPIDP-7-TS

Quantity: Each

Used to replace tip seals on Agilent IDP-7 and IDP-10

TTO H20E Silver Epoxy
QDC-AEP16

Quantity: Each

Compressor Charge Kit
QDC-4201-400

Quantity: Each

ACMS II AC Moment Reference Sample (GGG – Mounted)
QDC-4084-830

Quantity: Each

Heat Capacity Sample Frame and Guard
QDC-4085-216

Quantity: Each

Includes Platform with Heater and Thermometer – Uncalibrated.

20 Pin LLC Socket Adapter
QDC-4087-459

Quantity: Each

For use with the Type-M Multifunction Probe

Apiezon N Grease
QDC-4084-410-01

Quantity: Each

ACMS II Standard Sample Holder Adapter
QDC-4084-814

Quantity: Each

Can be used with ACMS II, MPMS 3 and large bore VSM coil sets.

Test Station - Puck
QDC-8084-400

Quantity: Each

Enables users to easily bench test samples mounted to standard pucks

MFP Fischer-to-LEMO Cable Fischer-to-LEMO Cable
QDC-3084-384

Quantity: Each

Allows connection of the Breakout Box-BNC to the PPMS/DynaCool/VersaLab Gray LEMO connection.

Heat Capacity Sample Puck
QDC-4085-210

Quantity: Each

Uncalibrated

He-3 Heat Capacity Sample Puck
QDC-4092-621

Quantity: Each

Scroll Pump Tip Seal Kit (Edwards)
QDC-HP13TS

Quantity: Each

48 Pin Leadless Chip Carrier Adapter
QDC-4087-446

Quantity: Each

For use with the Type-M Multifunction Probe

Polycarbonate Capsule
QDC-AGC3

Fits well in brass large bore sample holder (QDS-4096-630). ~11 mm long and ~4.6 mm diameter.

MFP Fischer-to-Fischer Cable
QDC-3084-383

Quantity: Each

Allows connection of the Breakout Box-BNC to the Type-M and Type-G Multifunction Probes

DR DC Resistivity/ETO Sample Mount
QDC-4091-610

Quantity: Each

DR mounts are Au-plated silver; one edge is sanded to show this.

VSM Oven Copper Foil Coupon
QDC-4097-039

Set of 10

Each foil coupon is 12 mm x 30 mm

Rotator Sample Board Puck Adapter
QDC-4084-375

Quantity: Each

VSM Oven Zircar Cement
QDC-4097-030

Quantity: Each

Standard Sample Holder
QDC-8000-001

Set of 500

 

Breakout Box - BNC
QDC-4087-457

Quantity: Each

Provides access to external electronics via BNC connectors. Each channel can be selectively grounded or tied to a common bus.

Puck Extraction Tool
QDC-4084-110

Quantity: Each

 

DC Resistivity/ETO Sample Puck
QDC-8084-109

Quantity: Each

Rotator Universal Sample Board
QDC-8084-341

Set of 3

Rotator DC Resistivity/ETO Sample Board
QDC-8084-371

Set of 3

Apiezon H Grease
QDC-4084-410-02

Quantity: Each

DR Heat Capacity Sample Puck (3D)
QDC-4085-280

Quantity: Each

Use in DynaCool Platform Only – Uncalibrated.

ACMS II DC Moment Reference Sample (Pd – Mounted)
QDC-4096-390-01

Quantity: Each

Universal Sample Puck
QDC-8084-100

Quantity: Each

Standard Torque Magnetometer Cantilever Chip
QDC-8084-369

Quantity: Each

Max torque is ~1e-5 N-m

VSM Brass Half-Tube Sample Holder
QDC-4096-391

Quantity: Each

3.2 mm inner diameter

VSM/ACMS II Sample Rod
QDC-4096-352

Quantity: Each

Diameter of blue bearings is 7.6 mm

TTO Heater Shoe
QDC-4084-585

Quantity: Each

VSM Large Bore Coil Sample Rod
QDC-4096-610

Quantity: Each

Diameter of blue bearings is 10.3 mm

Rotator Field Parallel Sample Board
QDC-8084-342

Set of 2

For in-plane sample rotation

TTO Sample Puck
QDC-4084-570

Quantity: Each

Does not include thermometer or heater shoes

Torque Magnetometer Board Adaptor Kit
QDC-4084-363

Quantity: Each

Includes two torque board adaptors and a small screwdriver

VSM DC Moment Reference Sample (Pd – Mounted)
QDC-4096-390

Quantity: Each

TTO Sample Leads (Strip)
QDC-4084-610

Set of 10

TTO Thermometer Shoe
QDC-4084-580

Quantity: Each

TTO Sample Leads (Disc)
QDC-4084-609

Set of 30

TTO Set of Shoes
QDC-4084-616

Quantity: Each

Includes two thermometer shoes and one heater shoe

Thermal Transport Calibration Shunt (Copper)
QDC-4084-608

Set of 2

Gelatin Capsule
QDC-AGC1

50 Pairs

Fits well in standard sample holder (QDC-8000-001) and brass large bore sample holder (QDC-4096-630). ~15 mm long and ~5 mm diameter.

Thermal Transport Nickel Samples
QDC-4084-611

Set of 2

Chip Carrier Test Station
QDC-4087-455

Quantity: Each

Enables users to easily bench test samples mounted to either the 48 pin LCC adapter or 20 pin LCC socket adapter

Scroll Pump Tip Seal Kit (Agilent)
QDC-HPIDP-7-TS

Quantity: Each

Used to replace tip seals on Agilent IDP-7 and IDP-10

Felt Pad for VSM Coil Set and Baffles
QDC-8096-272

Set of 3

 

VSM Powder Sample Holders (50 pairs)
QDC-4096-388

Quantity: 50 pairs

Snaps into brass half-tube sample holder (QDC-4096-391)

Thermal Transport H20E Silver Epoxy
QDC-AEP16

Quantity: Each

VSM Sample Rod Flexure
QDC-4096-366

Quantity: Each

Quartz Rod Sample Brace
QDC-4096-399

Quantity: Set of 5

Snaps into standard brass sample holder. Useful for orienting planar samples perpendicular to the applied field.

Grey Lemo Breakout Box Banana
QDC-3084-100

Quantity: Each

Used to permute leads to user

VSM Large Bore Brass Half-Tube Sample Holder
QDC-4096-630

Quantity: Each

4.8 mm Inner Diameter

VSM Oven Dry Mount Kit
QDC-4097-002

Quantity: Each

For use with samples that are affected by the moisture and heat involved in mounting with Zircar cement. Includes dry mount plates, staples, and copper foil coupons.

TTO Nernst Effect Thermometer Shoe
QDC-4084-581

Quantity: Each

Voltage lead is separated from the thermometer shoe (Application Note 1684-201)

Large Moment (3-Leg) Torque Magnetometer Cantilever Chip
QDC-8084-368

Quantity: Each

Max torque is ~1e-4 N-m

VSM Quartz Paddle Sample Holder
QDC-4096-392

Quantity: Each

4 mm wide

Vertical Sample Puck Kit
QDC-4084-440

Quantity: Each

Does not include any measurement stage/puck. Requires DC Resistivity/ECO sample mount (QDC-4092-610) for electrical measurements; or heat capacity frame (QDC-4085-216) for thermal measurements.

VSM Oven Sample Rod
QDC-4097-010

Quantity: Each

VersaLab VSM Sample Rod
QDC-4096-275

Quantity Included: Each

Diameter of blue bearings = 7.6mm

Versalab VSM Large Bore Coil Set Sample Rod
QDC-4096-276

Quantity Included: Each

diameter of blue bearings = 10.3mm

VersaLab VSM Guide Tube
QDC-4096-350

Quantity Included: Each

Inner diameter of blue tubes = 7.6mm

VersaLab VSM Sample rod flexure
QDC-4096-366

Quantity Included: Each

VSM Sample rod flexure adapter for PPMS and VersaLab

VSM Large Bore Aluminum Paddle Sample Holder (
QDC-4096-635

Quantity Included: Each

Sample holder optimised for securing thin film samples.

VersaLab VSM LBC Guide Tube
QDC-4096-675

Quantity Included: Each

Inner diameter of blue tubes = 10.3mm

VSM Oven Dry Mount Kit
QDC-4097-002

Quantity Included: Each

For use with samples that are affected by the moisture and heat involved in mounting with Zircar cement. Includes dry mount plates, staples and copper foil coupons.

VersaLab VSM Oven Sample Rod
QDC-4097-075

Quantity Included: Each

VersaLab Puck Extraction Tool
QDC-4302-013

Quantity Included: Each

Box of Standard Sample Holders
QDC-8000-001

Quantity Included: Set of 500

Felt Pad for VSM Coilset and Baffle
QDC-8096-272

Quantity Included: Set of 3

Felt strip pads for centering rings of VSM coilset.

Gelatin Capsules
QDC-AGC1

Quantity Included: Set of 100

Fits well in sample straws (AGC2) and brass large bore sample holder. ~15 mm long and ~5 mm diameter.

Polycarbonate Capsules
QDC-AGC3

Quantity Included: Set of 100

Fits well in brass large bore sample holder. ~11 mm long and ~4.6 mm diameter.

Compressor Charge Kit
QDC-4201-400

Quantity: Each

ACMS II AC Moment Reference Sample (GGG – Mounted)
QDC-4084-830

Quantity: Each

Heat Capacity Sample Frame and Guard
QDC-4085-216

Quantity: Each

Includes Platform with Heater and Thermometer – Uncalibrated.

20 Pin LLC Socket Adapter
QDC-4087-459

Quantity: Each

For use with the Type-M Multifunction Probe

Apiezon N Grease
QDC-4084-410-01

Quantity: Each

ACMS II Standard Sample Holder Adapter
QDC-4084-814

Quantity: Each

Can be used with ACMS II, MPMS 3 and large bore VSM coil sets.

Test Station - Puck
QDC-8084-400

Quantity: Each

Enables users to easily bench test samples mounted to standard pucks

MFP Fischer-to-LEMO Cable Fischer-to-LEMO Cable
QDC-3084-384

Quantity: Each

Allows connection of the Breakout Box-BNC to the PPMS/DynaCool/VersaLab Gray LEMO connection.

Heat Capacity Sample Puck
QDC-4085-210

Quantity: Each

Uncalibrated

48 Pin Leadless Chip Carrier Adapter
QDC-4087-446

Quantity: Each

For use with the Type-M Multifunction Probe

MFP Fischer-to-Fischer Cable
QDC-3084-383

Quantity: Each

Allows connection of the Breakout Box-BNC to the Type-M and Type-G Multifunction Probes

VSM Oven Copper Foil Coupon
QDC-4097-039

Set of 10

Each foil coupon is 12 mm x 30 mm

Rotator Sample Board Puck Adapter
QDC-4084-375

Quantity: Each

VSM Oven Zircar Cement
QDC-4097-030

Quantity: Each

Breakout Box - BNC
QDC-4087-457

Quantity: Each

Provides access to external electronics via BNC connectors. Each channel can be selectively grounded or tied to a common bus.

DC Resistivity/ETO Sample Puck
QDC-8084-109

Quantity: Each

Rotator Universal Sample Board
QDC-8084-341

Set of 3

Rotator DC Resistivity/ETO Sample Board
QDC-8084-371

Set of 3

Apiezon H Grease
QDC-4084-410-02

Quantity: Each

ACMS II DC Moment Reference Sample (Pd – Mounted)
QDC-4096-390-01

Quantity: Each

Universal Sample Puck
QDC-8084-100

Quantity: Each

Standard Torque Magnetometer Cantilever Chip
QDC-8084-369

Quantity: Each

Max torque is ~1e-5 N-m

VSM Brass Half-Tube Sample Holder
QDC-4096-391

Quantity: Each

3.2 mm inner diameter

TTO Heater Shoe
QDC-4084-585

Quantity: Each

Rotator Field Parallel Sample Board
QDC-8084-342

Set of 2

For in-plane sample rotation

TTO Sample Puck
QDC-4084-570

Quantity: Each

Does not include thermometer or heater shoes

Torque Magnetometer Board Adaptor Kit
QDC-4084-363

Quantity: Each

Includes two torque board adaptors and a small screwdriver

VSM DC Moment Reference Sample (Pd – Mounted)
QDC-4096-390

Quantity: Each

TTO Sample Leads (Strip)
QDC-4084-610

Set of 10

 

TTO Thermometer Shoe
QDC-4084-580

Quantity: Each

TTO Sample Leads (Disc)
QDC-4084-609

Set of 30

TTO Set of Shoes
QDC-4084-616

Quantity: Each

Includes two thermometer shoes and one heater shoe

Thermal Transport Calibration Shunt (Copper)
QDC-4084-608

Set of 2

Thermal Transport Nickel Samples
QDC-4084-611

Set of 2

Chip Carrier Test Station
QDC-4087-455

Quantity: Each

Enables users to easily bench test samples mounted to either the 48 pin LCC adapter or 20 pin LCC socket adapter

VSM Powder Sample Holders (50 pairs)
QDC-4096-388

Quantity: 50 pairs

Snaps into brass half-tube sample holder (QDC-4096-391)

Thermal Transport H20E Silver Epoxy
QDC-AEP16

Quantity: Each

VSM Sample Rod Flexure
QDC-4096-366

Quantity Included: Each

VSM Sample rod flexure adapter for PPMS and VersaLab.

Quartz Rod Sample Brace
QDC-4096-399

Quantity: Set of 5

Snaps into standard brass sample holder. Useful for orienting planar samples perpendicular to the applied field.

Grey Lemo Breakout Box Banana
QDC-3084-100

Quantity: Each

Used to permute leads to user

VSM Large Bore Brass Half-Tube Sample Holder
QDC-4096-630

Quantity: Each

4.8 mm Inner Diameter

TTO Nernst Effect Thermometer Shoe
QDC-4084-581

Quantity: Each

Voltage lead is separated from the thermometer shoe (Application Note 1684-201)

Large Moment (3-Leg) Torque Magnetometer Cantilever Chip
QDC-8084-368

Quantity: Each

Max torque is ~1e-4 N-m

VSM Quartz Paddle Sample Holder
QDC-4096-392

Quantity: Each

4 mm wide

Vertical Sample Puck Kit
QDC-4084-440

Quantity: Each

Does not include any measurement stage/puck. Requires DC Resistivity/ECO sample mount (4092-610) for electrical measurements; or heat capacity frame (4085-216) for thermal measurements.

Follow us:

 

Keep up to date with our latest product news and developments. Join our mailing list

Top